Produse pentru pentru aer (54)

IFA Technology designs and implements the right exhaust air purification system for every pollutant. Exhaust air scrubbers are used for exhaust air purification of exhaust air streams from industrial processes loaded with harmful gas. These exhaust air purification systems work according to the principle of absorption and separate pollutants present in the exhaust air in the liquid phase. Depending on the substance, pollutants are either physically dissolved or chemically bound by the addition of lye and/or acid. We consider your individual requirements and build customised exhaust air purification systems for you. With the companies Wessel-Umwelttechnik and Airprotech we have competent partners within the Deurotech Group at our side to develop special and complex systems for exhaust air purification.

Product Description Klima Cleaner is a fluid disinfectant for air conditioning and ventilation systems. It comes in an aerosol can with a one-shot valve. As the can empties itself, it uses the air circulation system to diffuse and atomise the sanitizer throughout the entire empty vehicle. Eliminates and continuously prevents a re-emergence of bacteria, fungi and mould Eliminates hotbeds of germs Stops unpleasant smells forming Prevents irritation of the eyes and respiratory tracts Safe for humans and animals No adverse side effects on the air conditioning or the vehicle interior Effective and safe Klima Cleaner is available in seven different scents: Unscented, fresh water, lemon, apple, vanilla, peppermint and leather This product is certified to BS EN 1276:1997 and BS EN 1650 (Chemical disinfectants and antiseptics) and tested as safe and non-flammable when used in vehicles. In contrast to similar products, Klima Cleaner is classified as “non-flammable”. Under normal,...

miromatic – The modular process technology offers individual solutions for optimising system and process performance with the objective of increasing the efficiency of the production line, preserving productivity and reducing the environmental burden. The process technology division also plans, designs and manufactures the following process engineering solutions in the foodstuffs industry: Customer-specific valve clusters Sterile air modules Pressure vessel construction per the pressure equipment directive Cooling and heating systems Continuous mixing devices (KME) Scraping heat exchangers (SWT) Thermal product treatment Servicing / system overhauls

We develop and manufacture blower components such as fans, motors, duct guides, electronics and housings and, if desired, integrate them into assemblies and devices. In addition, we develop entire blowers as well as the required equipment. Furthermore, we are your contact for fan optimisation with regard to improved volume flow, more efficient volume pressure and noise reduction.

Electric duct heater Electrical duct heater type “LEH-R” are intended for the heating of gaseous media. The main applications are the heating of air in ventilation - / air conditioning or heat-recovery installations. Wide use areas are applications of the process - / environment-technology i.e. at the catalytic afterburning of exhaust fumes or drying ovens or in the plastic - / textile or paper industry. Through a variable construction concept, diverse use possibilities emerge. The application of highly compacted electrical heating elements with high purity compacted magnesium oxide powder sheathed metal tube and the direct heat transfer at the medium to be heated leads to an efficient realization of the electric energy to thermal energy. Special materials of acid constant rustproof steel stand for the heating of aggressive media by disposal. Alternatively, the heaters can be delivered also in the materials INCOLOY, INCONEL, HASTELLOY and MONEL. The duct heaters essentially consist of the following main-components: Duct with adapters to flanges DIN EN 1092 Rod heating elements Temperature Sensors (Thermostat / Thermocouple / RTD) Electrical terminal box

Measurement of steam Much unused energy is wasted through the exhaust air during drying processes without appropriate control. The Ecomat AML optimises the heating energy required by monitoring charging of the exhaust air with water steam and controls this factor through the fan speed or the exhaust air vent control.

— For increased system efficiency and reduced fuel consumption of up to 2% — Prewarming of the combustion air takes over a small portion of the thermal output of the burner — Lower investment costs in comparison with conventional solutions, low amortisation time — Lower maintenance and servicing costs

Based on the SL series, the SLT probes are also characterized by an ultra robust construction and a fully stainless steel housing which makes them suitable for harsh environments. The combination of a hardchrome plated shaft with 6 mm in diameter and precision bearings guarantees highest resistance to lateral forces on the push rod. There are three different functional variants available to meet the demands of most measuring tasks: ■ Spring loaded mechanism: The push rod is fully extended by an internal spring. ■ Pneumatic version 1: The push rod extends by applying pressurized air. An internal spring retracts the push rod after releasing the pressure. ■ Pneumatic version 2: The push rod retracts by applying pressurized air. An internal spring extends the push rod after releasing the pressure. Each sensor requires a carrier frequency measuring amplifier to operate, which evaluates and transforms the sensors signal to a standardised analog output signal of 0...10 V or 4...

In allen Bereichen unseres gesellschaftlichen Lebens werden wir mit den unterschiedlichsten klimatischen Bedingungen konfrontiert. Dies trifft für den Privathaushalt und den Arbeitsbereich zu. Auch im Freizeit- und Erholungsbereich finden unsere Filter vielfältige Verwendungsmöglichkeiten. Durch den Einbau von Be- und Entlüftungselementen an Ventilatoren und Klimaanlagen sorgen wir für eine saubere Umwelt und ein gleichbleibend gutes Klima. Beispiele: Filterelemente für die Be- und Entlüftung von Ventilatoren. Verwendungsmöglichkeit in der modernen Bürokommunikation, z. B. als Filterelement am PC. Filterelemente für Klimaanlagen im häuslichen und gewerblichen Bereich. Zurück zu den Fertigungsbereichen

Universell einsetzbar - die Industrieluftabsaugung von ULMATEC

Direkte Außenluftkühlung für Rechenzentren Indirekte Außenluftkühlung von Rechenzentren. Indirekte Adiabatische Klimatisierung von Rechenzentren. DFCU. Ab 40 kW bis 500 kW Kühlleistung

Die Entstaubungsanlage KTK+ AIR-V ist mit seinem selbstreinigendem Gewerbefilter auf Basis von Druckluft und eingebautem Ventilator bestens für Handwerks- und Industriebetriebe geeignet, die eine Absaugung von feinen und mittleren Stäuben benötigen. Die Funktionsweise ist dieselbe wie bei der KTK+ FM Baureihe, aber die Reinigung der Filterbeutel erfolgt automatisch durch eine energiesparende Vorrichtung mit Differenzialdruckregler, welche den Lastverlust kontrolliert und den Luftfluss konstant hält. Die Stäube werden ständig von einem Sternventil herausgezogen. Die Absauganlage ist aus verzinkten und lackierten modularen Platten gebaut und besteht aus einem oberen Staubabsaugemodul, in dem der Ventilator untergebraucht ist, einem Zwischenmodul mit dem Reinigungssystem, einem mittleren Modul mit Filtergeweben sowie einem unteren Modul mit Beinen und dem Staubsammelsystem. Diese Modellreihe gibt es in zwei verschiedenen Varianten (siehe Bilder):

Die Herding MAXX Großfilteranlagen arbeiten nach dem Prinzip der reinen Oberflächenfiltration & sind generell zur Produktrückgewinnung von feinen, abrasiven, aber auch adhäsiven Stäuben geeignet.

Die KRAPF & LEX Filterbaureihe kulVAC ist geeignet für kleine Luftmengen in Verbindung mit Materialförderventilatoren. Die KRAPF & LEX Filterbaureihe kulVAC Die KRAPF & LEX Filterbaureihe kulVAC ist geeignet für kleine Luftmengen in Verbindung mit Materialförderventilatoren. Der Filter arbeitet ohne pneumatische Entkopplung und wird am Ende der Druckleitung des Ventilators montiert. Der Austrag wird in einem staubdichten Sammelbehälter aufgefangen. Sonderausstattung: Materialförderventilator Breite: 1,1 m Tiefe: 1,3 m Höhe: 2,0 m Anzahl Filterschläuche: 9 Absaugleistung: bis 1500 m³/h

Der JET STREAM reinigt dort, wo keine Absauganlagen eingesetzt werden können. Jeder AL-KO Industriesauger kann konfiguriert und damit Ihren Bedürfnissen einzigartig und individuell angepasst werden.

Dampf-Luftbefeuchter Condair EL mit BlowerPack zur Direktraumbefeuchtung. Der BlowerPack lässt sich auf dem Befeuchter selbst einfach befestigen und installieren. Er ist in zwei Ausführungen, für 5 - 15 kg/h und 16 - 45 kg/h verfügbar.

Absperrblase - Dichtkissen lang variabel 70 - 150 mm ø mit Druckluftkupplung

Dry lubrication with solid lubricants as longer-acting reserve layers in area of low sliding speeds subject to high surface pressures and pre-determined sliding paths Wear protection for increased service life of sliding surfaces Fully effective even after longer standstills Resistant to high temperatures, no adhesion of dust and dirt Advantages and benefits Highly effective due to good adhesion to prepared substrates Consistent coefficient of sliding friction under maximum loading of sliding film Wear protection of sliding points that can otherwise not be lubricated is possible Firmly adhering, pressure and temperature-resistant dry lubricating film Operating temperature:-35 °C → +450 °C Press-fit:µ = 0.10, no chatter Thread friction (M10/8,8):µ total = 0.05

Viele verschiedene Farben, Größen nach DIN ISO 5970, 5-Jahre Herstellergarantie - Beschreibung: - Sitzschale Kunststoff mit Luftpolster (Polypropylen) - Gestell Stahlrohr mit Ø 22 x 2,5 mm - Gestellfarbe pulverbeschichtet oder verchromt - Trittschutzkappen - stapelbar Zur Auswahl: - Gestellfarbe - Kunststofffarbe - Größe Ihre Vorteile: - 5-Jahre Herstellergarantie - Made in Germany Schalenfarben:Dunkelblau, Hellblau, Hellgrün, Orange Farbauswahl Gestell:15 RAL-Farben oder Chrom Herkunftsland:Deutschland Hersteller:Tischkönig GmbH Material:Kunststoff | Stahl Versandkostenfrei:ab 250 € netto Warenwert

In the fluid dynamics laboratory of our Wasserburg competence centre, we design new fan wheels and turbines and optimise existing systems for performance, energy efficiency and noise emissions. We also develop complete systems of wheels with power units. Our range of tests includes suction operation, pressure operation and also unpressurised measurements. Revolutions up to 40,000 r/min and diameters of up to 250mm are possible. In our prototype department, we are able to simulate or modify the environmental circumstances of the fan wheels or turbines, thus achieving optimal operational conditions. Furthermore, we carry out mould-flow analysis, use ANSYS from external partners for the flow simulation and establish the fault probability and fault effect with FPFEs. New: Development of blower systems and optimization of ventilation systems.

Electric duct heater Electrical duct heater type “LEH-K” are intended for the heating of gaseous media. The main applications are the heating of air in ventilation - / air conditioning or heat-recovery installations. Wide use areas are applications of the process - / environment-technology i.e. at the catalytic afterburning of exhaust fumes or drying ovens or in the plastic - / textile or paper industry. Through a variable construction concept, diverse use possibilities emerge. The application of highly compacted electrical heating elements with high purity compacted magnesium oxide powder sheathed metal tube and the direct heat transfer at the medium to be heated leads to an efficient realization of the electric energy to thermal energy. Special materials of acid constant rustproof steel stand for the heating of aggressive media by disposal. Alternatively, the heaters can be delivered also in the materials INCOLOY, INCONEL, HASTELLOY and MONEL. The duct heaters essentially consist of the following main-components: Duct with flat flanges Rod heating elements Temperature Sensors (Thermostat / Thermocouple / RTD) Electrical terminal box

EEx’e’ certified electric duct air heater EEx e T2 – T6 ATEX The “LEH-Exe” type electric heaters comprise a range of certified EEx e air duct heaters, custom built to meet client specifications and suitable for use in zone 1 & 2 hazardous areas. The main applications are the heating of air in ventilation - / air conditioning or heat-recovery installations. Wide use areas are applications of the process - / environment-technology i.e. at the catalytic afterburning of exhaust fumes or drying ovens or in the plastic - / textile or paper industry. Through a variable construction concept, diverse use possibilities emerge. The application of highly compacted electrical heating elements with high purity compacted magnesium oxide powder sheathed metal tube and the direct heat transfer at the medium to be heated leads to an efficient realization of the electric energy to thermal energy. Special materials of acid constant rustproof steel stand for the heating of aggressive media by disposal. Alternatively, the heaters can be delivered also in the materials INCOLOY, INCONEL, HASTELLOY and MONEL. The duct heaters essentially consist of the following main-components: Duct with flat flanges Rod heating elements Temperature Sensors (Thermostat / Thermocouple / RTD) Electrical terminal box

Flameproof unit air heater ATEX EEx d IIC T3 ATEX The „FUH“ range of flameproof electrical unit air heaters offer a hazardous area, space heating solution, for large premises requiring high heating capacity. They are certified for zone 1 or 2 areas, where the flammable atmosphere is a group IIA, IIB or IIC gas. This heater has an internal fan.

Electric Air heater Electrical air heater type “LEH-A” are intended for the heating of gaseous media. The main applications are the heating of air in ventilation - / air conditioning or heat-recovery installations. Wide use areas are applications of the process - / environment-technology i.e. at the catalytic afterburning of exhaust fumes or drying ovens or in the plastic - / textile or paper industry. Through a variable construction concept, diverse use possibilities emerge. The application of highly compacted electrical heating elements with high purity compacted magnesium oxide powder sheathed metal tube and the direct heat transfer at the medium to be heated leads to an efficient realization of the electric energy to thermal energy. Special materials of acid constant rustproof steel stand for the heating of aggressive media by disposal. Alternatively, the heaters can be delivered also in the materials INCOLOY, INCONEL, HASTELLOY and MONEL. The air heater essentially consist of the following main-components: Process flange Rod heating elements Temperature Sensors (Thermostat / Thermocouple / RTD) Electrical terminal box

— Für eine höhere Systemeffizienz und reduzierten Brennstoffverbrauch um bis zu 2 % — Vorwärmung der Verbrennungsluft übernimmt einen kleinen Teil der thermischen Leistung des Brenners — Niedrige Investitionen im Vergleich zu konventionellen Lösungen, niedrige Amortisationsdauer — Niedrige Wartungs- und Instandhaltungsaufwendungen

— Pour améliorer l’efficacité du système et réduire la consommation de combustible jusqu’à 2 % — Une petite partie de la puissance thermique du brûleur est utilisée pour le préchauffage de l’air de combustion — Faibles investissements par comparaison aux solutions conventionnelles, temps d’amortissement plus court — Faibles dépenses de maintenance et d’entretien

— Para una mayor eficiencia del sistema y una reducción del consumo de combustible en hasta un 2 % — El precalentamiento del aire de combustión asume una pequeña parte de la potencia térmica del quemador — Baja inversión en comparación con soluciones convencionales, periodo más corto de amortización — Menor coste de mantenimiento y de servicio

Spezialklimaschränke Kaltwassersätze zur Klimatisierung von Schalträumen für die Papierindustrie. Nutzung von Brunnenwasser zur kompressorlosen Klimatisierung. Regelfabrikat Siemens S7

Spezialrückkühler aus Edelstahl (V2A, V4A) mit EC Technologie speziell für Papierwerke oder ähnlichen Anforderungen

Die KRAPF & LEX Filterbaureihe kulVAC ist geeignet für kleine Luftmengen in Verbindung mit Materialförderventilatoren. Die KRAPF & LEX Filterbaureihe kulVAC Die KRAPF & LEX Filterbaureihe kulVAC ist geeignet für kleine Luftmengen in Verbindung mit Materialförderventilatoren. Der Filter arbeitet ohne pneumatische Entkopplung und wird am Ende der Druckleitung des Ventilators montiert. Der Austrag wird in einem staubdichten Sammelbehälter aufgefangen. Sonderausstattung: Materialförderventilator Breite: 1,1 m Tiefe: 1,3 m Höhe: 3,0 m Anzahl Filterschläuche: 9 Absaugleistung: bis 3000 m³/h